added dimSegmentY[] to adjust 5.6" - 9.6"

BOSL2/V08APR26/SKU2689999/lib/params.scad

@@ -1,31 +1,39 @@
-nW = 0.40; // Nozzle width without elephant foot
-EF = 0.2; // Elephant foot
-LH = 0.2; // Nominal Layer Height
-VOID = 0.02; // Eliminating void between mating surfaces
-
-scaleFACTOR = 1.0;
-$fn = 64;
-//$fa = 10;
-
-
-wd = 2.6; // wire diameter
-wOpenEnd = 116; // when the U-shape is pulled into a V-shape
-wClosedEnd = 26; // the closed of the stamp
-wMidHeight = 140; // approximation of the 6" as U or V
-
-
-cntY = 1; // Number of wires stacked
-wShiftY=3.25*wd;
-moveY=((cntY*wShiftY)-(wShiftY*0.5))-((cntY-2)*(wShiftY*0.5))-(wd*0.25);
-sizeY=(wd*0.5)+(wMidHeight+(wShiftY*(cntY-1)));
-bbY=[wOpenEnd+wd, sizeY, wd];
-
-cntZ = 1;  // Number of wires stacked
-moveZ=(cntZ*wd);
-bbZ=[wOpenEnd+wd, wMidHeight+(wd*0.5), moveZ];
-
-
-// Used in hinged_conveyor_simple()
-changeOpening = 2.25*wd; // 0.25 wd is an estimate clearance, to deal with the 0.4 nozzle capacity to hold dimension
-increaseOpen = wClosedEnd + changeOpening;
-decreaseOpen = wClosedEnd - changeOpening;
+nW = 0.40; // Nozzle width without elephant foot
+EF = 0.2; // Elephant foot
+LH = 0.2; // Nominal Layer Height
+VOID = 0.02; // Eliminating void between mating surfaces
+inchXYZ = 25.4;
+
+scaleFACTOR = 1.0;
+$fn = 64;
+//$fa = 10;
+
+
+wd = 2.6; // wire diameter
+wOpenEnd = 116; // when the U-shape is pulled into a V-shape
+wClosedEnd = 26; // the closed of the stamp
+wMidHeight = 140; // approximation of the 6" as U or V
+
+
+cntY = 1; // Number of wires stacked
+wShiftY=3.25*wd;
+moveY=((cntY*wShiftY)-(wShiftY*0.5))-((cntY-2)*(wShiftY*0.5))-(wd*0.25);
+sizeY=(wd*0.5)+(wMidHeight+(wShiftY*(cntY-1)));
+bbY=[wOpenEnd+wd, sizeY, wd];
+
+cntZ = 1;  // Number of wires stacked
+moveZ=(cntZ*wd);
+bbZ=[wOpenEnd+wd, wMidHeight+(wd*0.5), moveZ];
+
+
+// Used in hinged_conveyor_simple()
+changeOpening = 2.25*wd; // 0.25 wd is an estimate clearance, to deal with the 0.4 nozzle capacity to hold dimension
+increaseOpen = wClosedEnd + changeOpening;
+decreaseOpen = wClosedEnd - changeOpening;
+
+/* SlideY values
+These are the standard dimensions, each provides an uniform and stable segment Y
+[0] = wMidHeight + wd = 142.6 mm = 5.6"
+[8] = 9.6"
+*/
+dimSegmentY = [0, (0.5*inchXYZ),(1*inchXYZ),(1.5*inchXYZ),(2*inchXYZ),(2.5*inchXYZ),(3*inchXYZ),(3.5*inchXYZ),(4*inchXYZ)];