/* 79-character width
012345678.012345678.012345678.012345678.012345678.012345678.012345678.012345678
*/
///////////////////////////////////////////////////////////////////////////////
// LibFile: params.scad
// FileGroup: COTS
// FileSummary: Candidates for persistent parameters
//
//                                                                     DETAILS:
// Refactoring should start here, to avoid duplicates and magic numbers
// Todo: NONE
///////////////////////////////////////////////////////////////////////////////
nW = 0.40; // Nozzle width without elephant foot
EF = 0.2; // Elephant foot
LH = 0.2; // Nominal Layer Height
VOID = 0.02; // Eliminating void between mating surfaces
inchXYZ = 25.4;

// MOSTLY relevant to the 6" garden stamp
scaleFACTOR = 1.0;
$fn = 64;

wd = 2.6; // wire diameter
wOpenEnd = 116; // when the U-shape is pulled into a V-shape
wClosedEnd = 26; // the closed of the stamp
wMidHeight = 140; // approximation of the 6" as U or V

cntY = 1; // Number of wires stacked
wShiftY=3.25*wd;
moveY=((cntY*wShiftY)-(wShiftY*0.5))-((cntY-2)*(wShiftY*0.5))-(wd*0.25);
sizeY=(wd*0.5)+(wMidHeight+(wShiftY*(cntY-1)));
bbY=[wOpenEnd+wd, sizeY, wd];

cntZ = 1;  // Number of wires stacked
moveZ=(cntZ*wd);
bbZ=[wOpenEnd+wd, wMidHeight+(wd*0.5), moveZ];

// Used in hinged_conveyor_simple()
changeOpening = 2.25*wd; // 0.25 wd is an estimate clearance, to deal with the 0.4 nozzle capacity to hold dimension
increaseOpen = wClosedEnd + changeOpening;
decreaseOpen = wClosedEnd - changeOpening;

/* SlideY values
These are the standard dimensions, each provides an uniform and stable segment Y
[0] = wMidHeight + wd = 142.6 mm = 5.6"
[8] = 9.6"
*/
dimSegmentY = [0, (0.5*inchXYZ),(1*inchXYZ),(1.5*inchXYZ),(2*inchXYZ),(2.5*inchXYZ),(3*inchXYZ),(3.5*inchXYZ),(4*inchXYZ)];

// .
// .
// .

// MOSLTY relevant to the ESP32-S3
dimYVendorA = 63.0; // the length of the PCB, the IC overhangs
dimXVendorA = 25.6; // score mark residue adds to the nominal 1"
dimZVendorA = 5.0; // with parts mounted
ohXVendorA = 17.0; // the chip-side overhang
ohYVendorA = 6.2; // the chip-side
ohZVendorA = 1.00; // rests on the top of the PCB
ohZPCBVendorA = 1.6;
ohYUSB = 2.00; // USB ports overhang
ohXUSB = 20.00; // 2x ports opposite of the IC
ohZUSB = 3.4; // the Z of the USB ports
icXBody = 15.6; // the width of the IC

// Mostly relevant to pallet strapping COTS
S1655NW = 15.875; // Nominal Width 5/8", maybe anywhere within 2mm plus / minus
S1655NT = 0.508;  // Nominal Thickness 0.02", more uniform than width

// Snow marker 3/8"
snowMarkerAND = 9.525; // Stock type A, Nominal Dia