40 lines
1.2 KiB
OpenSCAD
40 lines
1.2 KiB
OpenSCAD
nW = 0.40; // Nozzle width without elephant foot
|
|
EF = 0.2; // Elephant foot
|
|
LH = 0.2; // Nominal Layer Height
|
|
VOID = 0.02; // Eliminating void between mating surfaces
|
|
inchXYZ = 25.4;
|
|
|
|
scaleFACTOR = 1.0;
|
|
$fn = 64;
|
|
//$fa = 10;
|
|
|
|
|
|
wd = 2.6; // wire diameter
|
|
wOpenEnd = 116; // when the U-shape is pulled into a V-shape
|
|
wClosedEnd = 26; // the closed of the stamp
|
|
wMidHeight = 140; // approximation of the 6" as U or V
|
|
|
|
|
|
cntY = 1; // Number of wires stacked
|
|
wShiftY=3.25*wd;
|
|
moveY=((cntY*wShiftY)-(wShiftY*0.5))-((cntY-2)*(wShiftY*0.5))-(wd*0.25);
|
|
sizeY=(wd*0.5)+(wMidHeight+(wShiftY*(cntY-1)));
|
|
bbY=[wOpenEnd+wd, sizeY, wd];
|
|
|
|
cntZ = 1; // Number of wires stacked
|
|
moveZ=(cntZ*wd);
|
|
bbZ=[wOpenEnd+wd, wMidHeight+(wd*0.5), moveZ];
|
|
|
|
|
|
// Used in hinged_conveyor_simple()
|
|
changeOpening = 2.25*wd; // 0.25 wd is an estimate clearance, to deal with the 0.4 nozzle capacity to hold dimension
|
|
increaseOpen = wClosedEnd + changeOpening;
|
|
decreaseOpen = wClosedEnd - changeOpening;
|
|
|
|
/* SlideY values
|
|
These are the standard dimensions, each provides an uniform and stable segment Y
|
|
[0] = wMidHeight + wd = 142.6 mm = 5.6"
|
|
[8] = 9.6"
|
|
*/
|
|
dimSegmentY = [0, (0.5*inchXYZ),(1*inchXYZ),(1.5*inchXYZ),(2*inchXYZ),(2.5*inchXYZ),(3*inchXYZ),(3.5*inchXYZ),(4*inchXYZ)];
|