37 lines
1.3 KiB
OpenSCAD
37 lines
1.3 KiB
OpenSCAD
/* 79-character width
|
|
012345678.012345678.012345678.012345678.012345678.012345678.012345678.012345678
|
|
*/
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
// LibFile: asm_proto_0001a.scad
|
|
// FileGroup: SKU2689999
|
|
// FileSummary: The metal wire stacking and placement of an array
|
|
//
|
|
// DETAILS:
|
|
// The potetial is a conveyor belt - or a catepillar track
|
|
// Todo: NONE
|
|
///////////////////////////////////////////////////////////////////////////////
|
|
|
|
include <pgsm_sixinch.scad>
|
|
|
|
|
|
/*
|
|
Sliding the stamps minus the entire length of the stamp.
|
|
No image published.
|
|
Not yet mapped for potential uses.
|
|
-------------------------------------------------------------------------- */
|
|
*hinged_conveyor_stacked(linkCount=1, slideY=(-wMidHeight), stackZ = wd);
|
|
|
|
/*
|
|
The COTS wire is not flat, so a 3*wd reduction is more accurate
|
|
No image pulished.
|
|
Not yet mapped for potential uses.
|
|
-------------------------------------------------------------------------- */
|
|
arcCompensate = 3*wd;
|
|
hinged_conveyor_stacked(linkCount=1, slideY=(-(wMidHeight-arcCompensate)), stackZ = wd);
|
|
|
|
|
|
/*
|
|
Single-pivot hinge, the two wires are in contact. Bent wires will cause tension.
|
|
No image published.
|
|
Not yet mapped for potential uses.
|
|
-------------------------------------------------------------------------- */ |